Um an den A1000 oder an Phönix und GBA-1000 eine Tastatur anzuschließen, wird eine amigakompatible Tastatur mit einem RJ10-Stecker (wie beim Telefon) benötigt.
Amiga 1000 to A2000 Keyboard Adaptor
Enclosed with this file, will be an IFF diagram of how to make yourself an adaptor, for using an A2000 style keyboard, on you Amiga 1000. Since there now seem to be many 1000's floating around, without keyboards, this can bring some utility back into that old workhorse.
The adaptor is very simple to build, yet there is some potential hazzard to your keyboard and/or computer if it is wired incorrectly. So, you build this AT YOUR OWN RISK! Any damages you do, are entirely your responsibility, and you cannot hold anyone else liable. If you decide to build it, make absolutely sure it is wired correctly, before plugging the keyboard in.
Just follow the schematics on the enclosed IFF picture. After you have the adaptor assembled, plug it into the A1000, WITHOUT the keyboard. Turn on the 1000 and measure the voltage from pin 4 (GND) to pin 5 (+5VDC) on the DIN connector. You should read +5 volts DC. If you are getting a negative reading, your modular connector is wired backwards.
After you test it successfully, turn off the system, plug in the A2000 keyboard, and you are ready to go. Make sure to insert the line: SETMAP USA1 in your STARTUP-SEQUENCE. This will enable the use of the extra keys on the new keyboard.
Pinbelegung A2000 (DIN)
Übersetzer und Neu-Zeichner gesucht !!